Posts Tagged ‘technology’

« Older Entries
Newer Entries »

Camcorder Microphone Rode NTG2 Features

Monday, March 19th, 2012

One of the biggest challenges amateur filmmakers face is the challenge of creating high quality sound recordings. No matter how good your videography may be, it will likely lack in quality if the sound recordings that accompany it are of a poor quality. For this reason, you should take time to learn about the various recording devices you can buy to make your video recordings of a professional grade. A camcorder microphone Rode NTG2 for instance can clean up your recordings and even give you the ability to create voice-overs for all of your video productions.

There are numerous reasons why this particular recording device is better than stock and aftermarket devices. Not only does this product come with technologies capable of improving the quality of the sounds you record, but it also comes with technologies that are designed to eliminate background noise as well. These advanced features can make even the most inexperienced amateur’s recordings of the highest quality possible too.

When recording amateur footage, it can be incredibly difficult to create a setting where very little noise pollution will affect the recordings being created. For this reason, if you would like to improve the quality of the amateur footage you capture, you should buy a device like the NTG2 that comes with sound enhancing technology capable of eliminating background noise so that only important sounds such as dialogue will be recorded.

The technology included in the NTG2 is so effective that you can even now record your productions in settings that were generally considered to be off limits in the past due to noise pollution. This technology is capable of eliminating background noises created by passing cars, noisy crowds, and even digital devices to ensure only your voice and relevant sounds occurring in the foreground of your videos are recorded.

This feature alone can greatly reduce the amount of background noise you pick up while recording, but other features such as the wind screen can also greatly enhance your recordings. Without features such as a wind screen, your sound recordings would be disrupted by air hitting the microphone. This type of distortion can make other recorded sounds unintelligible and even at times quite annoying.

Along with being designed to provide videographers with high quality sound, this device is also designed to be highly versatile too. If you purchase this microphone, you will be able to easily mount it onto your video camera to instantly start capturing the professional quality sound you crave. Plus, if you ever want to mount it to a boom stick, you can easily do so to enhance your productions even further.

While the camcorder microphone Rode NTG2 is designed for professional use, anyone can utilize its effective recording technology to get the high quality sound they desire. Since this product is designed to create the highest quality recordings for you, all you have to do is buy it and mount it on your camera to start getting the quality sound recordings you have always wanted for your video productions.

You may want to get a camcorder microphone for professionals. The rode stereo videomic is a great choice that many professionals go for.

Visit Wilkie Brothers Conveyors for all of your Rebuilt Conveyor Chain needs or Blue Water Mfg for other Conveyor Chain needs.

Tags: , , , , , , , , , , , ,
Posted in Industry | No Comments »

For A Great Set Of Desktop Speakers Try M-Audio Studiophile AV 40 Speakers

Saturday, March 17th, 2012

Technology improved in almost every way following the beginning of the digital era. Some things became quickly obsolete like the manual typewriter, others likes compact discs are on the way out. Technological advancement has a way of making things obsolete. A few decades ago having a great sound system meant big amplifiers, if only the technology of the M-Audio Studiophile AV 40 speakers had been available.

While the basic parts and operation of amplifiers has not changed since then the materials and the ability to control them has improved. The receivers, eight track players, reel to reel and other devices were bulky and looked like aircraft modules. That was actually intentional as an intentional style point; having a massive stereo systems meant it had to be good.

Today, small is better, we have seen the creation of the iPod and a wide variety of receivers that can fit in a pocket or purse. It seems that the majority of time people listen to music using nothing more than earphones or ear buds. So it begs the question that if one can listen to the music with such a tiny device, what purpose do amplifiers serve, if any at all?

The answer has to do with how our ears work and the use of reproduced music and voice. We hear sound only when the eardrums vibrated by waves caused by the sound source. Waves created by the source propagate through the air and cause the eardrum to move, which is then interpreted by the brain.

Amplifiers come in different sizes as larger cones vibrate more slowly to produce longer waves and smaller condoms vibrate faster generating higher frequencies. There are also comes that are targeted for the middle of the audible spectrum. The large cones are called woofers, small ones tweeters and those frequencies between the two are called mid-range.

Earphones or buds create waves through tiny oscillating diaphragms, and while the sound is transmitted, its quality is low. Amplifiers vary in quality based on their ability to recreate the original waves without adding mechanical sounds called noise produced in the replication. A larger speaker does not necessarily produce better quality, but it can produce greater volume.

The selection of what kind of amplifier to use with a desktop workstation is obviously a personal one. If one needs high-quality re-create sounds then a better quality amplifier will be required. The M-Audio Studiophile AV 40 speakers have the ability to produce excellent studio quality without the exceptional price.

Learn about the benefits of the M-Audio Studiophile av 40 today! You can get complete information about how to choose the M-audio speakers that will meet all of your needs now!

Visit Wilkie Brothers Conveyors for all of your Rebuilt Conveyor Chain needs or Blue Water Mfg for other Conveyor Chain needs.

Tags: , , , , , , , , , , , , ,
Posted in Industry | No Comments »

Level Indicator- Technique for Identifying Liquid Levels

Sunday, March 11th, 2012

Level indicator is an instrumentation utilised for locating amounts in tanks and silos that happen to be frequently unreliable. To stop any colloquial damage there is certainly constantly a growing demand for level indicators to acquire the specific details in regards to the amounts in the tanks and silos. Each tank has its storage capability, and with no the information, production could be impeded or to the worse, if an overflow happens, a perhaps harmful situation is developed.

Conventional level indicators can not determine amounts to its accuracy. As an example, foam and wax are hard to detect and measured accurately. Inappropriate perseverance of amount develop harmful and environmentally detrimental predicament. For industries needing to comply with security and approach requirements, thermographs may well prove to be a notably cost- successful resource to utilize. Infrared level indicators may also be employed to supply or verify info in regards to the issue within the tank or silo. Verification of degree indicating instruments and degree place carries on to become an complete need in industries.

The materials, whether solid, liquid or gas, in a tank or silo, behave differently when subjected to a thermal transition. This is due to the reason that the materials have different thermal capacitance characteristics. For example, gases typically change temperature much more easily than liquids. The thermal capacities of solids are similar to that of liquids.

The different way in which heat is transferred permits them to be distinguished with an infrared camera. For instance, solids such as sludge are influenced by the heat transfer. Fluids on the other hand are strongly affected by convective heat transfer. Level indicator is the key for determining levels in the tanks and silos during thermal transition.

Industries, no matter how big or small, always have a critical need for determining levels in tanks and silos, and to validate the existing level- indication instrumentation. The infrared thermal imaging gives a simple and cost- effective means of doing both. Conditions often change, thus changing the levels night and day, and throughout the year. As levels are not always immediately obvious or persistence, the careful infrared imaging and simple enhancement techniques can often produce remarkable results. So keep the risks minimal in your industry by using the right level indicator.

Find out about Level indicators

Visit Wilkie Brothers Conveyors for all of your Rebuilt Conveyor Chain needs or Blue Water Mfg for other Conveyor Chain needs.

Tags: , , , , , , ,
Posted in Industry | No Comments »

Using SolidWorks for Sheet Metal Fabrication

Wednesday, February 29th, 2012

Designers and engineers have several computer-aided design (CAD) software programs at their disposal. One of those CAD choices is SolidWorks, which can be used in mechanical engineering, aerospace and defense, consumer products, the building and architectural fields, in a myriad of engineering fields, and many other applications such as in the fields of medicine, energy, electronics, manufacturing and industry. CAD software lets users design in three dimensions instead of the usual two. It is a parasolid-based system and utilizes parametric feature-based solid modeling where solid objects can be represented in a computer system and manipulated. SolidWorks and any other CAD software having the parasolid geometric modeling kernel, allow for modeling to be done within the software. A design will start in two dimensions such as a photo or a drawing and will be developed into a three dimensional solid. Special tools are available in SolidWorks for the design of sheet metal. A component library of pre-designed components allows for a designer to choose from a design and not have to start a design at step one. One thing that can be done that is effective in SolidWorks is the ability to produce animated instructions for assembly of a manufactured product. Software for managing data is also available so that versions of product design releases can easily be kept track of.

Tools for Sheet Metal Design

Smart Fasteners Technology is a tool specific for sheet metal design. SolidWorks also allows users to work with weights and materials regarding their designs so that they can reduce costs. It also has tools such as Finite Element Analysis (FEA) software that allows for structural analysis of designs to be conducted. Manufacturing testing in the software environment is possible by using the DFMXpress tool to look for design flaws. Flaws can be found before a product goes to production and money can be saved by using the DFMXpress tool. Imagine if a design went to production and the costs incurred if the product had to be pulled and was unsaleable. Modeling from customer specifications can be done more effectively by being able to import data directly. Users needs to know how to use the product they purchased and SolidWorks offers 3DVIA Composer to produce this instructional documentation. Finally, SolidWorks allows for the design to be checked against the client’s specifications for total compliance.

Training for SolidWorks

Certifications in SolidWorks can be earned in sheet metal by taking the Certified SolidWorks Professional Sheet Metal exam and getting at least a score of 75%. SolidWorks recommends first taking the course SolidWorks Essentials and Sheet Metal and then taking the exam. An example of an exam question could be to give the mass of a certain part or the elongation of a bent metal part with a given K-Factor.

Sample Use of SolidWorks

Maloya is a company that specializes in the manufacturing of metal. Maloya produces metal for many fields such as process machinery, scientific, architectural, and many more. They have employed SolidWorks for reverse engineered products that were already manufactured as well as for programming to print and for digitizing as well as scanning for flat patterns. Through using IT resources and SolidWorks parametric modeling, they can work with virtual clients as well. The type of laser they use for cutting is a CO2 laser and some of the metals they work with are nickel, carbon steel, aluminum, titanium, and more.

Three dimensional modeling software is a popular tool used to design products in the manufacturing industry among other industries. There are many options, with SolidWorks being at the forefront of a myriad of software tools for the designer and engineer.

Reto Hug is the President of Maloya Laser which focuses on laser cutting technologies and complex metal manufacturing using advanced laser technologies servicing aerospace, medical, machinery, scientific and transportation requirements.

Visit Wilkie Brothers Conveyors for all of your Rebuilt Conveyor Chain needs or Blue Water Mfg for other Conveyor Chain needs.

Tags: , , , , ,
Posted in Manufacturing | No Comments »

Tank Level Measurement Techniques

Saturday, February 18th, 2012

In order to determine the amount of h2o within a tank, there are specific techniques that you’ll must comply with. The processes could vary according to the form of the drinking water tank. While referring to dimension, a single demands to remember that the dimension of the tank is not going to refer to its physical dimension.

Although speaking about dimension, 1 requirements to remember the dimensions of a tank is not going to make reference to its physical dimension. It rather refers towards the drinking water holding capacity in the tank.

As mentioned earlier mentioned, the tank level measurement procedures vary based on the form from the tank. So below we’re going to talk about the two the processes used for rectangular and round tanks.

How to measure water level in a rectangular tank? 1. Use a measuring tape to calculate the width of a rectangular tank. The measurements should be done in feet.2. After measuring the width, measure the length of the tank. 3. The next step is to measure the depth of water in the tank.4. Now multiply all the three measurements. This will help you to measure the total cubic feet of water that the tank contains. 5. If desired, you can convert the total cubic feet into gallons. For this, you will have to multiply the total cubic feet of water by 7.47.

How to measure drinking water level in the circular tank? 1.. Use a measuring tape to calculate the width of the rectangular tank. The measurements ought to be carried out in feet.2. Now come across the radius by dividing the width by 2. 3. Next you’ll have to multiply the radius by alone. 4. The up coming stage is to measure the depth of h2o in the tank. 5. Now multiply the measurement that you just have acquired in action 3 because of the depth of the water. 6. Finally you will have to multiply the outcome you will get in stage five by three.1417 PI. This will provide you with the whole cubic feet of h2o the tank consists of.7. If sought after, you are able to change the overall cubic toes into gallons. For this, you’ll have to multiply the entire cubic toes of water by 7.forty seven.Subsequent these tips should help you to execute tank level measurement procedures without having any error.

Find out about coal bunker level measurement

Visit Wilkie Brothers Conveyors for all of your Rebuilt Conveyor Chain needs or Blue Water Mfg for other Conveyor Chain needs.

Tags: , , , , , ,
Posted in Industry | No Comments »

« Older Entries
Newer Entries »